LSI XCHM3 Challenger Medium Outdoor LED Area Light

LSI XCHM3 Challenger Medium Outdoor LED Area Light

SMARTTEC™:  LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature. - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature.

LEDS:  Select high-brightness LEDs in Cool White (5000K) or Neutral White (4000K) color temperature, 70 CRI.

Distribution/Performance:  Type 3, 5 and FT. Exceptional uniformity with full cutoff creates bright environment at lower light levels. Improved backlight cutoff minimizes light trespass.

Housing:  Radiused, rectangular-shaped, aluminum housing with stainless steel or electrozinc plated steel mounting hardware. Fixture is IP65 rated.

Optical Unit:  Clear tempered optical grade flat glass lens sealed to aluminum housing creates a sealed optical unit. Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals. Patented integral single-blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture. Two stainless steel captive fasteners allow easy access to driver. One-piece extruded EPDM gasket seals optical assembly against housing.

Mounting:  Use with 5” traditional drilling pattern. An extruded radius 8” arm is shipped standard and compatible with all fixture mounting configurations. The fixture may also be mounted to 3”-5” round poles using the round pole plate adaptor accessory (RPP2), which must be ordered separately.

Electrical:  Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (UE-50/60Hz input) and 347-480VAC. Optional twistlock photocell receptacle is available. Photocell must be ordered separately.

Driver:  Available in 350mA and 450mA drive currents. (Drive currents are factory programmed). State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency. Components are fully encased in potting material for moisture resistance. Driver complies with FCC 47 CFR part 15 RFI/EMI standard.

Operating Temperature:  -40°C to +50°C (-40°F to +122°F)

Finish:  Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling.

Warranty:  LSI LED fixtures carry a limited 5-year warranty

Photometrics:  Please visit our web site at www.lsi-industries.com for detailed photometric data.

Shipping Weight (in carton):  33 lbs./15Kg LISTING - ETL listed to U.S. and Canadian safety standards. Suitable for wet locations.