Duraguard HR20Q DuraLED Portsmouth LED Post Top Lantern

Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable.

Listing & Ratings:
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750
IP66 Sealed LED Engine.

Finish:Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.

Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens. Gasketed to Seal LED Array.

Mounting: Post Top Accommodates "P3" 2⅞" O.D. x 3″ Tenon, Wall Mount Includes Cast Aluminum Arm (Wall Attachment Hardware NOT Included, Must be Selected and Provided By Contractor), and Pendant Mount Includes 15"  Swivel Stem for Mounting on Flat or Sloped Ceilings.

DuraLED LED: Aluminum Boards

Wattage:
19w Array: 19w, System: 20w; (35-50w HID Equivalent)
36w Array: 36w, System: 39w; (70-100w HID Equivalent)
53w Array: 53w, System: 58w; (100-150w HID Equivalent)
80w Array: 80w, System: 87w; (150-250w HID Equivalent)

Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V (13, 36, & 53W Only) 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.

Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.

Warranty: 5-Year Warranty for -40°C to +50°C Environment.