DuraGuard MWPQ DuraLED Medium Wallpack Type IV Optics Bronze Finish

DuraGuard MWPQ DuraLED Medium Wallpack Type IV Optics Bronze Finish

Specifications and Features:
Housing:
Die Cast Aluminum Housing & Hinged Front Frame, ½˝ Coin Plugs with O-rings for Conduit & Photocell.

Listing & Ratings:
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment.

Finish:
Textured Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.

Lens:
Prismatic Clear or SoftLED Prismatic Borosilicate Glass Lens

Mounting Options:
Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit.

DuraLED LED:
Aluminum Boards

Wattage:
Array: 25w, System: 27.2w; (150w HID Equivalent)
Array: 41.3w, System: 47w; (250w HID Equivalent)
Array: 50w, System: 54.3w; (250w HID Equivalent)

Driver:
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.

Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.

Warranty: 5-Year Warranty for -40°C to +40°C Environment