LSI EXN LED Excursion Parking Garage Canopy Light

LSI EXN LED Excursion Parking Garage Canopy Light

Optical System:
• Utilizes edge-lit technology providing best-in-class uniformity and excellent visual comfort with minimal glare.
• Optically clear acrylic light guide with tailored refractive distribution.
• Best in class high brightness LED’s provide uniform light guide luminance with no dead spots.
• Choice of two high performance distributions: Type 5 Wide and Type 5 Narrow (a concentrated distribution for atrium and exit/egress applications).
• Available in 5000K and 4000K color temperatures per ANSI C78.377. 3000K & 2700K color temperatures available by request, consult factory for lead time and DLC qualification information.
• Minimum CRI of 70. 90 CRI available by request, consult factory for lead time and DLC qualification information.

Electrical:
• High-performance driver features over-voltage, under voltage, short-circuit and over temperature protection.
• 0-10 volt dimming (10% - 100%) standard. • Standard Universal Voltage (120-277 Vac) Input 50/60 Hz. Optional High Voltage 347/480Vac Input available.
• L70 Calculated Life: > 100k Hours (See Lumen Maintenance Chart)
• Total harmonic distortion: <20% • Operating temperature: -40°C to +50°C (-40°F to +122°F)
• Power factor: >.90
• Input power stays constant over life. • High-efficacy LEDs with integrated circuit board mount directly to the housing to maximize heat dissipation and promote long life.
• Driver components are fully encased in potting material for moisture resistance. Driver complies with FCC standards.
• Field replaceable surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).
• Optional 120v-277v integral emergency battery pack is available to meet critical life safety lighting requirements. The 90-minute batteries provide constant power to the LED system, ensuring code compliance. A test switch/indicator button is installed on the housing for ease of maintenance. Battery Backup not available on 10L and 11L lumen packages.

Construction:
• Precision die-cast aluminum housing and lens frame for durability and consistency.
• Architecturally pleasing with no visible electronics, hardware, or seams from ground level.
• Hinged 16ga Galvanized mounting bracket provided for ease of installation and maintenance.
• IP66 rated luminaire (pending) protects integral components from harsh environments.
• Luminaire is proudly manufactured in the U.S. of U.S. and imported parts.
• Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Other standard LSI finishes available. Consult factory.
• 3G rated for ANSI C136.31 high vibration applications.
• Shipping weight: 13.5 lbs in carton.

Controls:
• Optional integral passive infrared motion and daylight sensor activates switching of luminaire light levels.
• LSI’s AirLink™ wireless control system options reduce energy and maintenance costs while optimizing light quality 24/7.

Installation:
• Standard mounting is a rigid 3/4” pendant mount or direct surface mount to a 4” (102mm) octagon box (box by others).

Warranty:
• LSI LED Fixtures carry a 5-year warranty.
• 1 Year warranty on optional Battery Back Up. Test regularly in accordance with local codes.

Listings:
• Listed to ETL.
• RoHS Compliant.
• State of California Title 24.
• American Recovery and Reinvestment Act Funding Compliant.
• Lighting Facts Approved.
• Suitable For wet Locations.
• IP66 rated Luminaire (pending).
• 3G rated for ANSI C136.31 high vibration applications
• DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.