CLICK HERE to schedule an appointment with our lighting expert.
• This fixture includes the outer housing and is low profile; great to use if your existing 2x2 housing is rusted or degraded in some way.
• Full panel brilliance, properly scaled to your canopy, with no annoying gaps or glaring diode point sources
• High Performance, Low Cost – most cost-effective LED canopy fixture in the marketplace
• Designed for utility and/or DLC approval and rebate participation
HOUSING - One-piece, die-formed, aluminumm housing with powder coated finish. One conduit knockout and four mounting holes.
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal).
DRIVE CURRENT - Choice of Low Wattage (LW) and Super Saver (SS).
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens to provide a uniform distribution of light to vertical and horizontal surfaces.
OPTICAL UNIT - Features an ultra-slim 7/8” profile die cast housing, with a standard flat glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture.
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure.
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output. Driver components are fully encased in potting for moisture resistance.
Complies with IEC and FCC standards.
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish.
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. Drivers feature two-stage surge protection (including separate surge protection built into
electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling.
INSTALLATION - Pre-assembled optical unit and mounting panel attaches to fixture housing via 4 fasteners. Driver is pre-mounted to back of optical assembly.
SHIPPING WEIGHT - 35 pounds.
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.
WARRANTY - Limited 5-year warranty.
LISTING - UL listed to UL 1598, UL 8750 and other U.S. and International safety standards. Suitable for wet locations.
PHOTOMETRICS - Applications layouts are available upon request.
Part Number | CRUS SM SC LED HO CW UE WHT |
---|---|
Manufacturer | LSI |
Watts | 132 Watts |
Lumens | 18633 |
Lumens Per Watt | 119 |
CRI | 70 |
Color Temperature | 5300 Kelvin |
Beam Angle | 160° |
Input Voltage | 120V-277V |
Rated Life | 100,000 hours + |
Minimum Operating Temperature | -40°C or -40°F |
Maximum Operating Temperature | 50°C or +122°F |
Dimensions | 22 15/16" x 22 15/16" x 4 1/2" |
Certifications | , , , , , , , , , , , |
Warranty | 5 Year |
Specification Sheet | |
Lead Time | Build Item 2-3 Weeks |