LSI Industries XLCW LED Slice Wall Sconce

LSI Industries XLCW LED Slice Wall Sconce

ENERGY SAVING CONTROL OPTION - DIM - 0-10 volt dimming enabled with controls by others.

OPTIONAL INTEGRAL MOTION SENSOR - Passive infrared motion sensor activates switching of luminaire light levels. High light level is activated when passersby enter target zone and increased to full brightness in 1-2 seconds. Low light level (30% of maximum) is activated when target zone is absent of motion activity for 2 minutes and is gradually ramped down (15 seconds) to low light level. Sensor detection range is 160° horizontal x 90° vertical x 30’ maximum distance.

EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

LEDS - Available with 75 (for SS output) or 105 (for HO output) select high-brightness LEDs in Cool White (5000K) or Neutral White (4000K) color temperature, 65 CRI minimum.

DISTRIBUTION/PERFORMANCE - Forward Throw (FT) or Symmetrical (S) distribution available. Ultra-high efficiency reflector provided with FT distribution.

HOUSING - Fabricated aluminum housing with distinctive rectangular shape. Mounting hardware is stainless steel or electro-zinc plated. Supply conductors sealed with molded EPDM bushing.

OPTICAL UNIT - Clear tempered optical-grade flat glass lens sealed to the aluminum optic housing creates an IP65 rated optical assembly. Pressure stabilizing breather allows super-tight protection while preventing cycling from building up internal pressures and vacuums that stress optical unit seals.

WALL MOUNTING - Galvanized-steel universal wall mounting plate easily mounts directly to 4” octagonal or square junction box. EPDM gasket is supplied to be installed between mounting plate and junction box, sealing junction box from entrance of water. The galvanized-steel universal plate allows the fixture to be suspended while making wire connections.

ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input). Prewired leads extended out the back of the unit through a rubber grommet eliminating the need to open the fixture to make wiring connections.

DRIVER - Components are fully encased in potting material for IP65 moisture resistance. Driver complies with IEC and FCC standards. Driver can be easily accessed.

OPERATING TEMPERATURE - -40°C to +40°C (-40°F to +104°F) FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Available in black, bronze and white. Other standard LSI finishes available. Consult factory.

WARRANTY - LSI LED fixtures carry a limited 5-year warranty.

PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data.

SHIPPING WEIGHT (IN CARTON) - 10 lbs./4.5Kg LISTING - UL listed to ANSI/UL1598, UL8750 and other U.S. and international safety standards. Suitable for wet locations.