LSI PLCS Practica Small SS LED Area Light Fixture

LSI PLCS Practica Small SS LED Area Light Fixture

SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature.

ENERGY SAVING CONTROL - DIM - 0-10 volt dimming standard enabled with controls by others.

EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

LEDS - Select high-brightness LEDs in (5000K), or (4000K) color temperature, 70 CRI.

DISTRIBUTION/PERFORMANCE - Type S (Standard Symetric). Exceptional uniformity creates bright environment at lower light levels. House Side Shield available for improved backlight control without sacrificing street side performance.

HOUSING - One-piece, die-formed aluminum housing contains factory prewired driver. Wiring access door (with safety lanyard) located underneath.

OPTICAL UNIT - Clear tempered flat glass or optional diffused (DFL) lens permanently sealed to weather-tight aluminum optic frame creates an IP65 rated optical unit (includes pressure-stabilizing breather).

MOUNTING - Tapered rear design allows fixtures to be mounted in 90° and 120° configurations without the need for extension arms. Use with 3” reduced drilling pattern. A round pole plate is required for mounting to round poles. Wall mount brackets are available for both direct fixture to bracket mounting and for use with tiltable tenon slipfitter. See accessory ordering info chart for all brackets. Proprietary pole quick mount accessories available with horizontal mounting or fixed 15° angled mounting (PQMH-KITCLR and PQM15-KIT-CLR) for mounting to square poles. Tenon Slipfitter Bracket available and tiltable up to 90° (BKA-XNM-ADJ-*-CLR). Fits 2” pipe (2 3/8” O.D.). See Accessory Ordering Information chart for all brackets.

ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277 VAC (50/60Hz input), and 347-480 VAC. Optional PCR is available.

DRIVER - Available in SS (Super Saver) and HO (High Output). Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed. IP65 rated driver.

OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F) FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Available in black, bronze and white. Other standard LSI finishes available. Consult factory.

WARRANTY - LSI LED fixtures carry a limited 5-year warranty.

PHOTOMETRICS - LM79 reports and IES files available on request.  We will provide a custom layout for your project free of charge.

SHIPPING WEIGHT (in carton) - One fixture: 17.5 lbs. (7.9 kg). Packed single pack only. One Adjustable Bracket: 5 lbs. One Wall Mount Bracket: 7 lbs.

LISTING - UL listed to U.S. and international safety standards. Suitable for wet locations. For a list of the specific products in this series that are DLC listed, please consult the LED Lighting section of our website or the Design Lights website at www.designlights.org.