LSI XLXM3 Lexington Decorative LED Area Light

LSI XLXM3 Lexington Decorative LED Area Light

SMARTTEC™:  LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature.

Energy Saving Control Options:  DIM - 0-10 volt dimming enabled with controls by others. BLS - Bi-level switching responds to external line voltage signal from separate 120- 277V controller or sensor (by others), with low light level decreased to 30% maximum drive current.

LEDS:  Select high-brightness LEDs in Cool White (5000K) or Neutral White (4000K) color temperature, 70CRI

Distribution/Performance:  Types 3, FT, and 5. Exceptional uniformity creates bright environment at lower light levels. Improved backlight cutoff minimizes light trespass.

Housing:  One piece housing/support frame is die-cast aluminum. Post top access cover and support arms are die-cast aluminum. Housing is sealed with an extruded silicone gasket.

Housing Top Cap:  Removable spun aluminum cap/driver enclosure is retained by captive stainless steel fasteners and safety cables. Housing and top cap interface is sealed with a one-piece extruded silicone gasket. Tool-less entry option is available.

Sealed Optical Unity:  Lens is clear, flat tempered glass, sealed to aluminum optics housing. Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components.

Fasteners:  All exposed fasteners are black oxide coated stainless steel. Internal fasteners are stainless steel or zinc electroplated steel.

Electrical:  Terminal block for attachment of incoming primary wiring is supplied. Twostage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC. Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).

Driver:  Available in Super Saver (SS) and High Output (HO) drive currents (Drive currents are factory programmed). State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency. Components are fully encased in potting material for moisture resistance. Driver complies with IEC and FCC standards.

Operating Temperature:  -40°C to +50°C (-40°F to +122°F)

Mounting:  Post Top and Wall mounting available. Pole selection information shown under fixture drawings.

Finish:  Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling.

Warranty:  LSI LED fixtures carry a limited 5-year warranty

Photometrics:  Please visit our web site at www.lsi-industries.com for detailed photometric data.

Listing:  Listed to U.S. and Canadian safety standards. Suitable for wet locations.