Nora NHIC-17QAT 6" IC Air-Tight Line Voltage Housing

Nora NHIC-17QAT 6" IC Air-Tight Line Voltage Housing

Description:  New construction housing for use in insulated ceilings can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is labeled for use with Nora 6" line voltage trims and compatible with all LED retrofits.

Features:
· IC Air-Tight energy saving by reducing the flow of air through the ceiling 
· Rated for direct contact with insulation 
· cULus listed for damp location and through branch circuit wiring 
· Quick connect provided 
· 24-1/2” Bar hangers with captive nails and alignment foot 
· Accommodates 1-1/4" maximum ceiling thickness

Construction:
Plastic Frame: High quality 0.0245 steel die-cut one-piece frame. 
Housing: 0.036 aluminum housing with riveted cap adjusts to maximum ceiling thickness of 1-1/4". Spring brackets accept torsion wing trim springs; slots on socket plate accept standard coil springs. 
Air Flow Restriction: Housing has factory-installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements. 

Socket:  
NHIC-17QAT: Galvanized steel socket plate adjusts inside the housing for optimum light performance. Contains a single medium base socket. Protective cap included protecting socket interior during ceiling painting. A socket plate can be removed in the field to convert to a floating socket.
NHIC-17QNBAT: Socket is free-floating and installs to eyeball, gimbal ring, and new trims equipped with socket brackets. Protective cap included protecting socket interior during ceiling painting. 
Bar Hangers: Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Hanger bars have T-Bar slots and alignment feet. Bar hangers are parallel to the junction box but can be repositioned 90º perpendicular to junction box if desired. “L” Shaped bar hanger foot to align to the bottom of construction joist. A T-Bar notch allows easy installation in a suspended ceiling. 
Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with two 1/2", three 3/4", and one 1-1/8" knockouts, four Romex® pryouts, and snap-on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out). 
Quick Connect Feature: Housing contains three UL approved quick connections that allow insertion of 1/4" stripped solid or tinned standard conductors to be inserted into the connector. Connectors are pre-attached to fixture power, common, and ground circuits. 
Thermal Protector: Standard UL thermal protector rated for 90°C is affixed to the inner top surface of the housing. 

Electrical:
Input Voltage:  120V
Socket: Medium base
Lamp: Lamp type based on trim selection 
Wattage: 100W max. (wattage varies based on trim selection)

Fire Box:

NRA-126: Nora Lighting’s Fire Rated Recessed Light Enclosure allows architects, specifiers, and installers to easily maintain the integrity of fire-rated ceilings for one-hour 

Labels and Listings:
cULus Listed for Damp Location w/ Feed Through (Wet Location when used with designated trims)
Meets or exceeds ASTM-283 Air-Tight Requirements
Washington State Approved
NYC Approved: Calendar #43895