Nora NUTP6-16LEDRGB 12V 16' RGB LED Tape Light Roll
RGB LED Tape Light has the colors Red, Green, and Blue in every LED diode. Several colors of visual spectrum can be selected and programmed with a 120º viewing angle. A stationary color, automatic changing colors and brightness can be selected and changed at anytime with the press of a button. Very low profile RGB LED Tape Light is a great use in show exhibition lighting, architectural enhancements, bars, theaters, store fronts, or anywhere you need a punch of color. Controller needed to operate color variations. This flexible LED light source is a durable silicone encapsulated tape, cULus Listed for Wet Location applications and IP65 rated.
Included with Tape Light Roll: (1) 16' Roll, (15) Clear Acrylic clips, (5) Shrink Wrap Tubes [NATL-400], and (1) 12" Power Line Interconnector [NARGB-710].
Mounting: Each Tape Light comes with pre-applied 3M™
Cuttable: Tape Light is cuttable every 6" or 6 LEDs, no soldering required.
Separable: Tape Light has separable connections every 12", no soldering required
Driver: 6 different wattages are available to accommodate different run lengths.
Nora NUTP6-16LEDRGB 12V 16' RGB LED Tape Light Roll
RGB LED Tape Light has the colors Red, Green, and Blue in every LED diode. Several colors of visual spectrum can be selected and programmed with a 120º viewing angle. A stationary color, automatic changing colors and brightness can be selected and changed at anytime with the press of a button. Very low profile RGB LED Tape Light is a great use in show exhibition lighting, architectural enhancements, bars, theaters, store fronts, or anywhere you need a punch of color. Controller needed to operate color variations. This flexible LED light source is a durable silicone encapsulated tape, cULus Listed for Wet Location applications and IP65 rated.
Included with Tape Light Roll: (1) 16' Roll, (15) Clear Acrylic clips, (5) Shrink Wrap Tubes [NATL-400], and (1) 12" Power Line Interconnector [NARGB-710].
Mounting: Each Tape Light comes with pre-applied 3M™
Cuttable: Tape Light is cuttable every 6" or 6 LEDs, no soldering required.
Separable: Tape Light has separable connections every 12", no soldering required Driver: 6 different wattages are available to accommodate different run lengths.
Power: 12V DC Input / 2.5 Watts Per Foot
Light Source: 12 LEDs per Foot
Operating Temperature: -25ºC to 60ºC (-13ºF to 140ºF)