Howard Lighting 2 Lamp T12 Rapid Start Electronic Ballast EP2/40RS/MV/MC

Howard Lighting 2 Lamp T12 Rapid Start Electronic Ballast EP2/40RS/MV/MC

Hassle-free maintenance and upkeep

In designing our ballasts, one of our key requirements was to develop a product that performed and was virtually hassle-free to maintain. With fully parallel lamp
operation, if one lamp fails, all of the others in the fixture remain in full function making maintenance minimal. And the anti-striation control on our ballasts eliminates
the maintenance issues caused by striating lamps. The overall result is exactly what you’ve grown to expect from Howard – another one of our best-in-class ballasts that can significantly reduce the maintenance frustration your customers may be experiencing from the competition.

Tested and proven
With Howard Lighting Products, you can rest assured that we won’t put our name on it until it surpasses our high standards for quality, value, and performance. For that reason, every ballast manufactured at Howard is tested and proven beyond UL requirements before it is shipped to you. In fact, we thoroughly test each product so that you can expect a top-quality product straight from the box.

Ballast Specifications
• Ballast shall have a five-year warranty
• Ballast shall be UL certified
• Ballast shall be sound rated Class A
• Ballast shall be Class P Type 1 Outdoor
• Ballast shall have a Lamp Current Crest Factor of <1.7
• Ballast shall meet ANSI Standards C82.11-2005 & C62.41-2001
• Ballast shall meet FCC 18 Non-Consumer Limits
• Ballast shall have a lamp operating frequency great than 40kHz
• Ballast shall have a 32oF/0oC minimum lamp starting temperature for primary lamp
• Ballast shall be Rapid Start
• Ballast shall be Series Lamp Operation
• Ballast shall have minimum Power Factor of 98% for primary Lamp operation
• Ballast shall operate within +/- 10% of the ballast specified line voltage at 60 Hz
• Ballast shall have a maximum case hot spot temperature of 70 Celsius